Instructions / Assembly

Instruction, Use & Care Manual
Please save this manual for future reference.
Product
Item #s
:
WH136 (pre
-
lit), WH137 (pre
-
lit)
,
WHAP339 (pre
-
lit), WHAP340 (pre
-
lit)
Product Description:
Artificial Porch Tree
Assembly and Instruction Procedure:
Every carton should contain a top section and a bottom section.
This will depend on what model you have purchased. Also included is a base.
1. Remove all packaging (i.e. cardboard or plastic) before beginning. Remove contents from packaging.
2. Choose a location where the tree is to be displayed.
3. Put the pot base on the ground then insert the tree body into the pot firmly. (See arrow A on Figure 1)
4. Gently lower all branch tips on tree. Take care not to place unnecessary pressure on the brackets during
assembly (Figure 2).
5. The branches on your tree can be adjusted to give your tree the desired fullness. For best results, straighten
and separate all branch tips, then bend them slightly upward.
6. Plug tree lights into a power outlet. (Figure 3)
Figure 1 Figure 2 Figure 3
YOUR TREE IS NOW READY TO ENJOY!
Storage Tips:
1. Warning - Disconnect power from the lights.
2. Remove all decorations.
3. Remove tree from urn by pulling up on center pole at base of tree.
4. Staring from the top, carefully press the tips back up against the stem.
5. Store the product in a cool, dry location protected from sunlight where the temperature does not exceed
35˚C (95˚F).