Instruction manual

10
 Network download and playback the recorded files in DVR.
Chapter II System Installation
Section 1 Operating Environment
The following operating environment for this DVR must be adhered to:
DVR Operating Environment
Items
Instructions
Electromagnetism
DVR‘ complies with National Electromagnetism
Radiation Standards.
Temperature
-10℃ to 55℃
Humidity
10 % to 95 %
Power Supply
AC220/230V 50/60HZ
Please pay particular attention to the following:
 Keep away from heat sources and high temperatures and avoid direct sunlight.
 Do not leave in humid places and never touch with wet hands.
 Never spill liquids of any kind on the unit.
 The unit is only to be opened by qualified persons.
 Do not place other equipment on the DVR.
Section 2 HDD Installation
Equipment does not include the hard disk, configure the installation hard disk size needs to be calculated
according to the video programme, Specific calculation methods see Appendix 1. The chassis of the demolition
and hard drive installation, be sure to please professionals.
Users can also be accessed via the eSATA interface connected drive expansion box.
Installation of Hard Drive.
1. Remove DVR Lid.
2. Remove HDD mounting bracket, then fit HDD onto bracket using supplied mounting screws. Replace
HDD mounting bracket.
3. Connect the ATX power cable and HDD cable.