Instruction manual
16
ChapterⅢ DVR Operation
Section 1 DVR Front Panel
2UCase D1model and 2U Case CIF model
Fig. 8
No.
Name
specification
1
F1
Reserve
DISARM
Cancel alarm beep
LOCK
Logout
ESC
1. ―Cancel‖ key 2. Hide the status column in preview mode
SEARCH
Entry ―Search‖ interface
PTZ
Enter PTZ control mode
SPLIT
Split screen mode switch
MENU
Enter shortcut menu
2
ENTER
―OK‖ key
UP
1. ―UP‖ key 2. Display the status column in preview mode
DOWN
―Down‖ key
LEFT
1. ―Left‖ Key 2. Switch to last screen display in preview mode
RIGHT
1. ―Right‖ Key 2. Switch to next screen display in preview mode
3
0-9
1. Number key ―0-9‖ 2. Switch 1-9ch single screen display
3. In motion detect and shield alarm area setup interface, number key ―1‖ set area as
effective, number key ―2‖ set area as noneffective.
1-32
Corresponding channel record indicator (it lights when corresponding channel is
recording)
EDIT
Get into input method interface
-/--
Press this key under monitor mode, "--" will be marked in the top of screen, press the
number key will switch the right channel.(press 2 and 3, ch 23 will displayed)