Instruction manual

23
System Logout
Method 1: 2U Case D1 model and 2U Case CIF model，press ―LOCK‖ on front panel to logout.
Method 2: Set ‗Auto Logout‘ as ON in ―Main Menu‖→ ―Setup‖→ ―General‖ and input idle time, then system will
auto-lock keyboard if no command input within the time set.
Method 3: Enter ―Main Menu－Setup—Maintenance‖ to enter ―Maintenance‖ interface, select ―LOGOUT‖ to
logout.
Section 3 Shortcut Menu
In monitor mode click the right mouse button, a shortcut menu pops up, as in
Figure 13.
 Main Menu: You can do basic parameters, videos, hard drive
management, display settings, and so forth parameter settings.
 Split: multiple-screen control。
 REC: Enter manually video interface.
 Playback: Enter the ―Search‖ interface, you can retrieve the video file
for playback or download.
 PTZ: Enter the PTZ control interface. Fig. 13
 Mute: Cancel Audio Output.
 Switch to CVBS: Switch to the secondary output (SPOT VOUT) control.
 E-ZOOM: Be a part of the screen displays the zoomed.
 E-MAP: Enter the e-map mode.
Section 4 Status Bar
In monitor mode, move the mouse to the picture below, the system automatically pop-up in the status bar, as
shown in Figure 14.
Figure 14