Instruction manual

25
Setup is finished, you can select the menu below the "copy", and the parameter will be set to another channel.
PTZ Control
After the PTZ parameter is set, press ―PTZ‖ key on front panel to enter PTZ control mode.
Fig. 16 Fig.17
In the interface, the direction, zoom, focus and Iris can be controlled.
Auto-cruise is in the middle of direction button.
 Set preset position
In PTZ control mode, select ―Setup‖ to enter preset position setup dialog interface as shown in Fig. 17.
Select "Add New" Edit preset. After you have finished adding preferences, in the "ORIGINAL" drop-down box,
select the preset you just added, click on "Ok" to set the preset point is the current head position, click on the
"Call" can be invoked preferences. The "ORIGINAL" to origin.
 Cruise Setup
Choose ―Cruise‖, and get into the interface as follows in fig.18.
Fig. 18 Fig. 19
This device supports different time periods run different cruise lines. Select "settings" to route settings interface,
you can set each route point-after-the-box, in the preset time spent, and switch between preset.
 AUX setup