Instruction manual

29
Section 8 Main/Spot Video output
This model support main output and spot output, this two ports can be controlled and output independently.
User can switch the two controls by press "SPOT" in the front panel. Spot output controllable, on the front
panel of the ―SPOT‖ light is lit.
VGA and HDMI is main output, and can be whole controlled.
SPOT VOUT support split screen and playback control.
Section 9 Matrix output
The "MATRIX VOUT" in back panel is Matrix output. User can configure it as single channel or sequence in
"Main Menu—PTZ Setup--matrix".
Section 10 Picture Adjustion
This feature can be used only by a mouse operation.
E-Zoom
On the monitor screen, select a channel, and then click the right mouse button, the shortcut menu, select "E-
Zoom" into electronic mode, at this point with the mouse in screen box out an area, the system will box out of the
area to enlarge, click the right mouse button to exit the E-Zoom mode.
Picture Amplify
In a multiple-screen display, move the mouse to the edge of the screen, when the mouse pointer changes to
" ", a long press the left mouse button and move the mouse to resize the screen size.
Section 11 E-Map
Choose "E-MAP" in shortcut menu to get into map interface. Right click to call the menu (as show in Fig.22),
user can lead in the map or add camera.
Lead in map: User can put the map into usb flash memory that need to lead in, choose "lead in map -usb" to
lead into the DVR(map must be JPG format,1280*1024, and the name is map).