Instruction manual

31
Chapter V Parameters Setup Guide
Section 1 Basic Parameter Setup
General Setup
Enter ―Main Menu－Setup－General‖ as shown in Fig. 24.
Move cursor with and on the front panel and select item with and .
 DVR Name：Define DVR name. When you access DVR remotely, you can find all the DVR intuitively by
their names .If you want to modify the DVR name,
please move cursor to DVR name edit box and press
―EDIT‖ or ― ‖ key to enter into input mode.
 System Time: Modify the system time.
 NTP time: Select NTP time as ―On‖, you can entry
―NTP‖ interface to set service and interval of NTP.
 Time Format：Setting the time format and DST.
 Video Format：Auto adapt according to video input.
When video format is changed on operation, you need
to reboot the DVR to take effect. If there is no
connection video when powered on, the system defaults to PAL. Fig. 24
 Alpha: Adjust menu contrast. (Range from00 to 99. 99 stands for low contrast).
 Auto logout: Host keyboard lock feature. Enable automatic log out function, you can set up automatic log
out of the wait time before, the default is 5 minutes without any operation, the system will automatically log
out. Do not turn on automatic log out function, the system does not automatically locks the keyboard, at this
point if the user wants to log out, you can press on the front panel of the "lock" key.
 Output: Set video output for widescreen or normal mode, you can also set the resolution of the system's
output.
 Mouse Sensitivity: Sets the mouse movement.