Instruction manual

35
Fig. 28 Fig.29
 Channel Number: Select a channel for setup.
 Calendar: ―yy/mm/dd/‖ can be chose on the left of Calendar. For Example : choose 2008-10-20.
 Time Period: Setup max two period for one day recording at most.
 Today, Every day, Every week, Every Month: Take 2008-10-20( Monday) for example, select ―Today‖
means only recording during the set periods in 2008-10-20, select ―Every day‖ means recording during the
set periods everyday from 2008-10-20, select ―Every week‖ means recording during the set periods every
Monday from 2008-10-20 and select ―Every Month‖ means recording during the set periods at the 20
th
of
every month from 2008-10-20.
NOTE: Reset at the same day is available. The later mode will replace the former one. The function
can be applied to holiday setting.
 Apply: Press ‗Apply‘ to save setting temporarily. For example: set recording periods in 2008-10-20 and press
‗Apply‘, then other recording period could be set in the same menu without exit. Press ‗OK‘ to save all
setting permanently.
NOTE: Only press ‘OK’ to save all setting permanently without lost when power is blackout. Press
‘Apply’ to save temporarily, all setting will lose when power is off.
 Copy：On a certain channel setup is finished, you can enter the "copy" menu, the channel settings to another
channel.
 List: Press ‗List‘ to list schedule recording time table (Max.120 records) of current channel. Records delete
operation is available in this menu.
Motion
1.5U model, need to press "Armed" in front panel to open alarm after configure the correct parameter.