Instruction manual

38
Video Lost
When the video signal for various reasons are lost, missing parameters by setting the video to discover this
phenomenon. The corresponding parameter description see the motion detection .
Alarm Elimination
Click ―DISARM‖ key on front panel to eliminate beep alarm if the alarm is activating.
Section 4 Communication
Network
Enter ―Main Menu－Setup—Communication－Network‖ as shown in Fig. 34.
Fig. 34
 Mode: You can select model as Static, DHCP or PPPoE. On ―Static Address‖ status, IP Address, Net Mask,
Default Gateway and DNS should input by user self. On ―DHCP‖ status, IP Address and Net Mask will be
obtained by system automatically. PPPoE Configuration menu, enter the user name and password, and then
select the network mode to "PPPoE", the system automatically obtain an IP address, subnet mask, and
gateway, etc.
 IP Address: Example 192.168.000.100. This IP address must not be conflicted with other IP.
 Port: On PC client to access the hard disk recorder desired port number, Example 9998.
 Subnet Mask: Example 255.255.255.000.
 Gateway: Example 192.168.000.001 (Modem/Router local address).