G-Trender II Pr of e s si o n a l GP S Cycl e Co m p u te r User Manual WSG-2000 English
WSG-2000 Professional GPS Cycle Computer Table of Conte nt s 1 2 3 4 4 5 8 9 10 12 13 14 15 Product Overview Standard Package Illustration on how to install Micro SD card Install the battery on Wheel Speed, Cadence Sensors Charge the Battery by USB cable Function Description Status Bar Description Pair the Wheel Speed, Cadence and Heart Rate Sensors Install Mount Holders on the Bike Accessories Installation Installation about the Magenet Installing on Speed/Cadence GPS Setting 16 17 18 19 20 21 22 23 28
SAFETY NOTES •• •• •• •• •• •• •• •• The Global Positioning System (GPS) is a U.S. space-based global navigation satellite system. It provides reliable positioning, navigation, and timing services to worldwide users on a continuous basis in all weather, day and night, anywhere on or near the Earth.
Pr o duc t O ve r v iew 1 ESC / MENU 7 Hot Key to Add Mark Point Short Press:Exit 8 Hot Key for fast switch to favorite pages 9 Journey accumulated function Button Long Press:Return to the Main Page 2 Central Button:Select the up, down, left and right function icons.
St an dar d Pa c k a ge •• 1 x WSG-2000 Professional GPS Cycle Computer (built-in Micro-SD card interface ) •• 1 x Micro-SD card •• 1 x Rechargeable Li-ion battery •• 1 x Mini USB cable •• 1 x User Manual •• 1 x Cadence Sensor •• 1 x Speed Sensor •• 1 x Heart Rate Sensor •• 3 x CR2032 Batteries •• 1 x Mount Holder Package Optional Accessories •• AC adapter with USB Port •• Car Charger with USB Port •• Belt Clip Holder Before you open the package of G-Trender II, please make sure that your package contains
I llus tration on how to in s t all the Mic r o SD c ar d 3
Install the battery on Wheel Speed, Cadence Sensors 111 Remove the battery cover on the back sensor using a coin, or the equivalent tool. 222 Insert new lithium batteries (CR2032) with the (+) sign upward and (-) negative downward, 333 Close the battery cover firmly. 444 Tight the battery cover to the sensor using a coin, or the equivalent tool. Charge the Battery by USB cable •• Place the battery into the battery slot on WSG-2000.
Func tion De s c r iption 08:11 06-Jan-36 GPS Information 3D Provide GPS-related information and settings. FIX Full Log ON GPS Information 1 A.GPS GPS Information 2 GPS Information 3 Reset GPS Coordinates Display Format Electronic compass / G-Sensor Function Electronic compass, Attitude information Compass / G-Sensor Compass Note Attitude calibration Compass calibration Please note that the Pitch Angle and Roll Angle will change rapidly during the movement.
Fun c tion De s c r iption Barometer/UV Function Trip computer Function Provide altitude, pressure, temperature, ultraviolet radiation information and related settings. Barometer/UV Altitude Chart Pressure Chart Temperature Chart Provide information of biking and settings.
My Training Function Setup Function Provide track, time, distance, altitude setting for training program Provide system and operation information and settings. My Training System My Training Yo u c a n a dju s t t h e proportional scale on the track with central button up or down.
St atus Bar De s c r iption Logger Status. Enable or Disable Logger USB Status. Journey accumulated Status: This function is designed to record all related biking information along the ride when enabled. Key Lock. Wheel Speed Signal Reception Status. GPS Status Cadence Signal Reception Status. The Power Status about Battery. Heart Rate Signal Reception Status. Note 1. Logger 2. Logger and Journey accumulated are different and separate functions. Logger will record your tracks during the trip.
Pair the Wheel Speed, Cadence, and Heart Rate Sensors Wheel Speed/Cadence Heart Rate Sensor 111 Remove battery from Wheel Speed or Cadence.(Sensor Side) 222 Put the battery in the sensor again and use a coin to twist the battery cover and lock it back into the place. (Sensor Side) 333 Go to search device page for pairing sensors. (WSG-2000 Side) (Main Page->Setup->Device->Wheel speed or Cadence) Activating the search function on page of Wheel Speed or Cadence.
Install Mount holders on the Bike Horizontal Mount Holder 1 2 4 3 •• Horizontal Mount holder on the handle bar 111 Back side view 222 Stick double-faced sticker on the concave surface of holder 333 Slip provided straps trough their holes 444 Tighten both straps on the handle bar 555 Slide WSG-2000 downwards aligning with the holder’s grooves till a “click” is heard. 666 To take out, press the spring bar downwards and slide upwards WSG-2000.
Vertical Mount Holder 1 2 4 3 •• Vertical Mount Holder on the Stem 111 Back side view 222 Stick double-faced sticker on the concave surface of holder. 333 Slip provided straps trough their holes 444 Tighten both straps on the Stem 555 S l i d e W S G -2 0 0 0 d o w n w a r d s 5 6 aligning with the holder’s grooves till a “click” is heard. 666 To take out, press the spring bar downwar ds an d slide upwar ds WSG-2000.
Acce s s or ie s I n s t allation •• Wear the Hear Rate Sensor 111 Install the battery (CR2032) on the heart rate sensor. 222 Use a coin to twist the battery cover and lock it back into the place. 333 Insert the HR strap hook into the two sides of holes, and press it until it fixed on the rubber.
I n s t allation ab out the Ma ge ne t Crank Installation about the magenet for the cadence sensor 1.Please check the width of the crank and cut off the rubber to the appropriate length according to it. 2.Slide through the straps along the curve and the hole on the rubber. 3.Place the magnet onto inner side of the crank and fix it with the strap. 4.Cut off the additional part of the strap beside the knot. Crank Installing on Magnet of Speed Sensor 1.
I n s t allin g on Sp e e d/C a de nce the magnet on the frame of rear wheel wheel speed sensor cadence sensor the magent on the cadence Mount the speed, cadence sensor, and magnet on the bike •• 111 Please pair the sensor before 14 mounting it on the bike 222 Secure the magnet and sensors correctly on the cadence and wheel as picture indication.
GPS Setting WSG-2000 provide information about how to reset GPS, set coordination and display format etc. (Main Page->GPS->Press the “SET” key) 111 GPS Restart: Hot start / Warm start / Cold start WSG-2000 with high-sensitive chipset can well receive and acquire the GPS signals generally when in normal and frequent use.
Compa s s C alibration 111 Implement Calibration on page of “Compass Calibration”. (Main Page->Compass->Press the “SET” key). P.S WSG-2000 can auto-calibrate itselves or you can manually calibrate the Compass if it goes wrong. Normally, the accuracy of compass will be affected by magnetic things. You can try more times or move to different places and try again if manually calibration is not successful.
At titude Calibration 111 First, please position the mount properly on the handle bar or Stem on your bike and fix it. 222 Slip WSG-2000 on the mount. 333 Please locate your bike on horizontal plane (0°) . 444 Start the attitude calibration (Main page->Compass->Press the “SET” key).
Altimeter Calibration As the value of pressure and altimeter may be influenced by the environment, WSG-2000 provides three kinds of values interference to provide the most accurate information to the users. (Main page-> Barometer / UV-> Press the “SET” key) 111 GPS altitude: the value is acquiring from that of GPS. 222 Manual Adjustment: the value is acquiring from altitude and pressure sensor and you can also set the related setting by yourselves.
Nav igation Se t tin g •• Track back Navigation Setting •• Mark Navigation Setting (Main Page->Navigation->Track Navigator->Press the “SET” key) (Main Page->Navigation->Mark Navigator->Press the “SET” key) 111 Mark List: Select the location Mark you want to go. WSG-2000 can indicate a straight line direction and distance to the mark point. 222 Ad d M a r k : M a r k a l o c a t i o n f o r M a r k Navigator. 333 Delete All Marks: Delete all marked points in data base.
Trip Computer Setting Log ON NO FIX Full My Favorite Trip Computer << 1 >> Field 1 Speed Field 2 Distance Field 3 Average Speed Field 4 Max.Speed 20 111 (Main Page->Trip Computer-> Press the “SET” key) 222 User can choose 22 information you need and set them on the pages of ‘Trip Computer’ 1~4 as well as enable or disable the pages.
My Trainin g •• My Training Setting (Distance / Time / Altitude) 111 (Main page->My Training->Press the “SET” key) 222 In this function, user can set distance, time and altitude for the training goal for workouts. My Training Item Distance Switch OFF Set •• Track Training Setting 111 (Main Page->Track Training->Press the “SET” key) 222 My Favorite Track: Select your favorite track for workouts. 333 Delete all tracks: Delete all my favorite track.
I nfor m ation •• Odometer Setting •• History Info 111 (Main page->Info->Odometer->Press the “SET” key) 222 W S G -2 0 0 0 p r ov i d e s o d o m e t e r 3 b i ke s c a l c u l a t i o n separately, you can create and name on your own bikes. You can input the value of distances based on a previously recorded data continually recording the bike. (To build up my Favorites Track.
Setup System •• User 111 (Main Page->Setup->System->User) 222 You can create your personal profile here; it can automatically calculate your maximum hear t rate, hear t rate zones and calories consumptions. User Name G-Trender Gender Male •• Bike Information: 111 (Main Page->Setup->System->Bike) 222 You can set up 3 customized bikes information. For the detailed size of wheel, please refer to the following table.
Setup Wheel size 24 L (mm) Wheel size L (mm) Wheel size L (mm) 12 x 1.75 935 26 x 7/8 1920 27 x 1-1/4 2161 14 x 1.5 1020 26 x 1(59) 1913 27 x 1-3/8 2169 2090 14 x 1.75 1055 26 x 1(65) 1952 650 x 35A 16 x 1.5 1185 26 x 1.25 1953 650 x 38A 2125 16 x 1.75 1195 26 x 1-1/8 1970 650 x 38B 2105 18 x 1.5 1340 26 x 1-3/8 2068 700 x 18C 2070 18 x 1.75 1350 26 x 1-1/2 2100 700 x 19C 2080 20 x 1.75 1515 26 x 1.40 2005 700 x 20C 2086 20 x 1-3/8 1615 26 x 1.
•• Change the Backlight and Interval •• Time Zone 111 (Main Page->Setup->System->Backlight) 222 Here you can set the selections on the setting of backlight 111 (Main Page->Setup->System-> Time Zone) 222 About the time zone setting, the system will inter val. As the setting indicated in the figure for example, the backlight stays on 10 seconds after 1 minute interval in circulation. automatically convert to local time according to the GPS time.
Setup •• Hot Key Selection •• Power Saving Mode 111 (Main Page ->Setup->System->Button Shortcuts) 222 The hot key selec tions are designed to quickly 111 (Main Page ->Setup->Power Save) 222 When enable the power-saving mode, the system will switch on the function pages selected on the list. (The middle key on the right side of WSG-2000 units) automatically turn off the screen to save the power consumption if paused after 1 minute, but the unit is still working.
•• Alerts Setting 111 (Main Page ->Setup->Set Alert) 222 You can set the value on alerts regarding over- speed setting and UV measurement and heartbeat rates if beyond the settings of limited value. (You can input your personal inf or m ation in t h e Main Pa ge ->Se tup >System->User. WSG-2000 will auto calculate your optimized heartbeat rate) Or you can set by your selves. If the alert function is enabled, the system will warn you when your movement is over the limited setting.
Run WSG -Tool on PC •• WSG-Tool is the software for looking up the track files, displaying it on map, making the training reports, Geo-Tagging the JPEG photos according to Logger data, or exporting /importing my favorite tracks. It can also convert the files into different formats as well as advanced settings on the system. You don’t need to install USB Com Port Driver in advance. Please connect the USB cable on WSG-2000 and computer for running of WSG-Tool.
The easily operating application software, WSG-Tool •• You can set and easily perform the GPS parameters, transfer the format of tracks or geo-tag the photos by W SG_Tool stored and built-in the Micro-SD card of WSG-2000 29
Run WSG -Tool on PC How to Execute WSG-Tool 111 Turn-On WSG-2000 and connected it to PC side with USB cable. The Screen of WSG-2000 will show the page as below. PC will auto run WSG-Tool while you select “open WSG-Tool” item. Note: It may take longer to wait for running WSG-Tool in the first time. Please be patient in waiting. 222 When the WSG-Tool is running, the computer screen will appear the following window. If not, you can also go to “my computer” to find ‘WSG-TOOL.exe’ and execute it. H.
333 The WSG-Tool will auto-read the last recorded track from Micro-SD card as Google Maps format and display it by browser connection.
Run WSG -Tool on PC At same time, the WSG_Tool icon is hidden on the below system bar. Click WSG-Tool icon to open the WSG-Tool main page.
USB Com Por t Dr i ve r I n s t allation Follow below steps for installing the USB Com Port driver. 111 Connect WSG-2000 with USB cable to PC side and run “WSG-Tool”. The WSG-Tool will copy USB Com Port driver to the path of “My documents \ WSG2000”. Then press “ESC” key on WSG-2000 to restart the WSG-2000. 222 User will see a menu on the WSG-2000, please select “Normal mode”. The Found New Hardware Wizard will pop up on PC as below, please follow below steps.
USB Com Por t D r i ve r I n s t allation Tick items as below picture and press “Browse”. 34 Choose the location of “… \ My documents \ WSG2000”, and press “OK”.
•• When back the Found New Hardware Wizard, please press “Next” button to install USB Com Port driver. •• Select “Continue Anyway” to continue install USB Com Port driver. Click “Finish” to complete it.
USB Com Por t D r i ve r I n s t allation You can check com por t number in ‘Device Manager ’ and make sure the USB driver is successfully installed (WSG-2000 device must connect with PC via USB cable). Then you can define the com port for WSG-2000 (the following picture shows the COM4) as the communications interface.
Fir mwar e Up gra de This is the instruction on how to update firmware forWSG-2000. 111 Connect WSG-2000 to PC via USB cable. If you haven’t install USB Com 222 Go to Firmware Upgrade function page. (Main Page->Setup->System->Firmware Upgrade) port driver before, please refer to the part of installing on USB Com Port Driver.
Fir mwar e Up gra de 333 WSG-2000 will enter update mode. User also can cancel it by pressing the “ESC” key on the WSG2000. 444 Execute the WSG2000_Firmware_Update_Tool. (Step1)Select firmware file (G-TrenderII_v1.0.0.0.wfw)。 (Step2)Select USB Com port number and then press “Connect” Button. (Step3)Press “Update Firmware” button to start upgrade firmware. 555 When the process of update is finished, WSG-2000 will reboot it selves automatically.
Sp e c if ic ation s 111 222 333 444 555 666 777 Standard Lithium Battery BL-5C NOKIA 3D electronic compass + 3D Accelerometer High accurate pressure altimeter High resolution 4 gray-scale LCD H240xW160 UV sensor 2.4G wireless communication module The most up-to-date GPS IC u-Blox5 (5th generation) Model Number G-TRENDER II / WSG-2000 Descriptions Professional GPS Cycle Computer GPS Frequency Correlator L1, 1575.
Acquisition Reacquisition Hot start Warm start Cold start <1 sec. <3.5 sec 33 sec 34 sec Power Battery Source Battery Charger 1100mA DC 5V Battery Charging Time 4 Hours (Device is working) 3 Hours (Power off the device) Operation Time 13 Hours (Normal mode with low back-light) 14 Hours (Normal mode w/o back-light) 17 Hours (Power saving mode w/o back-light) Track record (Logger) Max.
41