Operation Manual

9
Heart Rate Sensor
Remove the battery from Heart Rate Sensor. (Sensor Side)
1.
Go to search device page for pairing sensors. (WSG-2000
2.
Side) (Main Page->Setup->Device-> Heart Rate)
Put the battery in the sensor again and use a coin to twist
3.
the battery cover and lock it back into the place. (Sensor
Side)
Activating the search function on page of Heart Rate.
4.
(WSG-2000 Side)
Repeat the step 1~4 until it is successfully paired.
5.
Pair the Wheel Speed, Cadence, and Heart Rate Sensors
Wheel Speed/Cadence
Remove battery from Wheel Speed or Cadence.(Sensor Side)
1.
Put the battery in the sensor again and use a coin to twist the battery
2.
cover and lock it back into the place. (Sensor Side)
Go to search device page for pairing sensors. (WSG-2000 Side)
3.
(Main Page->Setup->Device->Wheel speed or Cadence)
Activating the search function on page of Wheel Speed or Cadence.
(WSG-2000)
Repeat the step 1~4 until it is successfully paired.
4.
WheelSpeed
Search
WheelSpeedDevice
HeartRate
Search
HeartRateDevice
PS. The sensors of WSG-2000 have been paired in advance for usage, if the signals are not being received by the unit. Please pair
the unit with sensors again. The data of device will be stored in the memory after pairing, you don't need to pair the unit again
next time unless you need to change to another one.