Operation Manual

13
1.Please check the width of the crank and cut off the rubber to the appropriate length
according to it.
2.Slide through the straps along the curve and the hole on the rubber.
3.Place the magnet onto inner side of the crank and fix it with the strap.
4.Cut off the additional part of the strap beside the knot.
1.Please remove any dirty or oily things on the spoke to make sure no slipperiness before installing magnet.
2.Release the safety hook on the magnet.
3.Be sure to clip it on the spoke tightly into the most inner side of gap on the central of two-sided magnet．
4.Lock the safety hook back on magnet in order to avoid it being thrown off in cycling.
5.Installing on Magnet of Speed Sensor.
Installation about the Magenet
Installation about the magenet for the cadence sensor
Installing on Magnet of Speed Sensor
Crank
Crank
Please c l i p t h e magnet f o r s peed
sensor on the spoke, place the spoke
into the bottom side of crack.