Operation Manual

38
WSG-2000 will enter update mode. User also can
3.
cancel it by pressing the “ESC” key on the WSG-
2000.
Execute the WSG2000_Firmware_Update_Tool.
4.
(Step1)Select firmware file (G-TrenderII_v1.0.0.0.wfw)。
(Step2)Select USB Com port number and then press “Connect” Button.
(Step3)Press “Update Firmware” button to start upgrade firmware.
When the process of update is finished, WSG-2000 will reboot it selves
5.
automatically.
Note
Please note that if the process of update is failed, WSG-2000 will
enter the firmware update mode automatically. Please connect WSG-
2000 to PC again and repeat the operation from the step 4.
Firmware Upgrade