Operation Manual

4
Charge the Battery by USB cable
Place the battery into the battery slot on WSG-2000.•
Connect USB Cable to USB port on PC or the AC Adapter •
(Optional Accessories).
Plug the mini-USB end of cable to WSG-2000 mini-USB •
Port.
Install the battery on Wheel Speed,
Cadence Sensors
Remove the battery cover on the back sensor using a coin, or the
1.
equivalent tool.
Insert new lithium batteries (CR2032) with the (+) sign upward and
2.
(-) negative downward,
Close the battery cover firmly.
3.
Tight the battery cover to the sensor using a coin, or the equivalent
4.
tool.
Note
Please take out the battery when it is not on
1.
operation over 30 days.
Please be sure to turn off the WSG-2000 before
2.
bat ter y replacement. If you take it out when
operation, it may cause the error in memory to lost
the recorded data.
It is suggested to charge the battery when the low
3.
power level is indicated on the screen to make sure
the complete efficiency of the recording data and
GPS acquisition
Please make sure the type of battery is correctly .
4.
The wrong battery placement may be explosive
during the usage.
Pl e ase di sca r d t he ba t t e r y to t he re c y c le d
5.
institution