Specifications

IntegrationinstructionsforhostproductmanufacturersaccordingtoKDB996369D03OEMManualv01
2.2 List of applicable FCC rules
FCCPart15SubpartC15.247&15.207&15.209
2.3 Specific operational use conditions
ThemoduleisaWIFImodulewithWIFI2.4Gfunction.
OperationFrequency:2412~2462MHz
NumberofChannel:11
Modulation:802.11bCCK;802.11g/nOFDM
Type:FPCAntenna
Gain:3dBiMax.
Themodulecanbeusedformobileorapplicationswithamaximum3dBiantenna.Thehost
manufacturerinstallingthismoduleintotheirprodu
ctmustensurethatthefinalcompositproductcomplies
withtheFCCrequirementsbyatechnicalassessmentorevaluationtotheFCCrules,includingthetransmitter
operaition.Thehostmanufacturerhastobeawarenottoprovideinformationtotheenduserregardinghow
toinstallorremovethisRFmoduleintheuser'smanualoftheendpro
ductwhichintegratesthismodule.The
endusermanualshallincludeallrequiredregulatoryinformation/warningasshowinthismanual.
2.4 Limited module procedures
Notapplicable.ThemoduleisaSinglemoduleandcomplieswiththerequirementofFCCPart15.212.
2.5 Trace antenna designs
Notapplicable.Themodulehasitsownantenna,anddoesn’tneedahost’sprintedboard
microstriptraceantennaetc.
2.6 RF exposure considerations
Themodulemustbeinstalledinthehostequipmentsuchthatatleast20cmismaintainedbetweenthe
antennaandusers’ bo
dy;andifRFexposurestatementormodulelayoutischanged,thenthehostproduct
manufacturerrequiredtotakeresponsibilityofthemodulethroughachangeinFCCIDornewapplication.The
FCCIDofthemodulecan
notbeusedonthefinalproduct.Inthesecircumstances,thehostmanufacturerwill
beresponsibleforre‐evaluatingtheendproduct(includingthetransmitter)andobtainingaseparateFCC
authorization
2.7 Antennas
AntennaSpecificationareasfollows:Type:FPCAntenna
Gain:3dBi
Thisdeviceisintendedonlyforhostmanufacturersunderthefollowingconditions:Thetransmittermodule
maynotbeco‐locatedwithanyothertransmitterorantenna;
Themoduleshallbeonlyusedwiththeinternalantenna(s)thathasbeenoriginallytestedandcertified
withthismodule.Theantennamustbeeitherpermanentlyattachedoremploya‘unique’ antenna
coupler.
Aslongastheconditionsabovearemet,furthertransmittertestwillnotberequired.However,thehost
manufacturerisstillresponsiblefortestingtheirend‐productforanyadditionalcompliancerequirements
requiredwiththismoduleinstalled(forexample,digitaldeviceemissions,PCperipheralrequirements,etc.).
2.8 Label and compliance information