USER MANUAL 8201 Eastpoint Dr. Dallas, TX 75227 www.wiselift.
WiseLift 2
CONTENTS I. SAFETY AND PRECAUTIONS .............................................. 4 II. WHAT’S INCLUDED .............................................................. 5 III. YOUR WISELIFT CHAIR ....................................................... 6 Lift Chair Placement IV. ASSEMBLY/DISASSEMBLY .................................................. 7 V. OPERATION ..........................................................................
SAFETY AND PRECAUTIONS The product you have purchased combines state-of-the-art components with safety, comfort, and styling in mind. Read and follow all instructions, warnings, and notes in this manual and all other accompanying literature before attempting to operate this product for the first time. If there is any information in this manual which you do not understand, or if you require additional assistance for setup or operation, please Contact a WiseLift representative at 1-877-782-2010.
• Loose items, including but not limited to clothing and blankets • Electrical power cords Storage and Operation Temperatures • Transportation or storage: -104°F/-75°C to 158°F/70°C • Operation: 50°F/10°C to 104°F/40°C Purchaser agreement By accepting delivery of this product, you promise that you will not change, alter, or modify this product or remove or render inoperable or unsafe any guards, shields, or other safety features of this product; fail, refuse, or neglect to install any retrofit kits from tim
YOUR WISELIFT CHAIR This section describes the features of your lift chair. Carefully review the function and location of each item described, and note that the illustrations and option locations shown in this manual may not reflect the exact model of lift chair that you own. The WiseLift Chair must be placed at least 30” from the wall. Failure to do so may potentially cause damage to the wall and to the chair. It will also void the chair’s warranty.
ASSEMBLY NOTE: If you discover a problem at any point during the setup and positioning of your lift chair, stop and contact a WiseLift representative at 1-877-782-2010. To avoid personal injury and/ or product damage, do not plug the unit into the electrical outlet until the problem is corrected and do not attempt to fix electrical problems by yourself. Your lift chair will require some assembly before initial use. It may also require disassembly to make servicing the chair more convenient.
Figure 1.2c Figure 1.2a 6. 7. Figure 1.2b Ensure that the power supply cable and remote cable (green cable markers) are properly attached to the base connectors. These will come pre-connected. Secure the remote cable at the base of the chair to the preferred armrest side with the adjustable cable clip (Figure 1.2c). This will ensure that the remote cable doesn’t disconnect Check to see if the chair is stable in its final location. If the chair seems unstable or wobbly, adjust (Figure 1.
OPERATION There are certain precautions that should be taken during the operation of your lift chair. Read and follow these precautions carefully in order to ensure safe lift chair operation and to prevent injury and/or product damage. • Plug the power cord directly into a surge protector, then into the wall outlet. Do not use an extension cord! • Do not place anything (for example, a drinking glass) on top of or near the external transformer.
THE REMOTE Our feature packed remote gives you complete control as you relax. Simple icon description and LCD display make this remote best in class. No more searching for functions or confusing settings. • 5 Pre-Programmed Positions • Lift Button • Foot Rest Control • Chair Back Control • 4 Massage Zones • Heat Button • Vibration Intensity Button • Automatic Timer Button • On/Off Button The WiseLift remote includes 5 pre-programed positions.
Figure 2.2 LIFT BUTTON This feature assists the user in sitting down from a standing position or stand up from any seated position. From any position press and hold the “Lift” button (green circle in Figure 2.2). If the chair is reclined in any position, it will first return to the “Sit” position and then proceed to lift. Once in the lifted position, you can press and hold the “Sit” button (orange circle in Figure 2.2) to return to the floor.
MASSAGE AND HEAT FEATURES The massage zone button (green circle in Figure 2.4) will cycle through the 4 massage zones. You will see which massage zones are on the remote LCD display. The heat button (Orange circle in figure 2.4) will cycle through the 2 heat zones on the chair, chair back heat, seat heat, both on, or off. Figure 2.4 Note: The heat function will automatically turn off after 10 min in “Auto” mode.
2. 3. 4. 5. Press and hold the TV position button until the chair fully reaches the preset position. You will notice the TV position is indicated on the LCD screen. Now adjust the chair to your personal comfort with the independent chair back and foot rest controls. Press and hold the HEAT button for 10 seconds, or until the LCD display flashes. Once the LCD display flashes, your personal position is stored. You have now completed the reprogramming of the “TV Position”.
VOICE RESPONSE Your chair is equipped with a voice response feature that will audibly notify you of the chair commands that are selected on the remote. When a chair position or setting is selected on the remote, you will hear an audio description of that command. This feature can be turned off or on with your remote. 1. Make sure that both heat and massage features are turned off. 2. Press and hold the vibrations intensity button (blue circle in figure 2.6) until LCD flashes. Figure 2.6 3.
BASIC TROUBLESHOOTING Your lift chair may require occasional troubleshooting. The following troubleshooting tips and FAQs should summarize what you need to know about your lift chair. If at any time you do not feel comfortable performing the troubleshooting steps listed in this manual, contact a WiseLift representative at 1-877-782-2010. Please have the model number, and nature of the problem when calling.
• Ensure the hand control is connected properly to the lift chair. If connected properly, the LCD on the remote will be lit. • If the LCD display does not turn on, contact a WiseLift representative at 1-877-782-2010. What if my lift chair is unstable after I position the chair? • The floor may be uneven or the carpet may be affecting chair position. Adjust the leg levelers in the area where the chair is rocking. See section “Your Lift Chair” for instructions on leveling your chair.
CLEAN AND CARE Your lift chair will require routine maintenance checks. You can perform some of these checks, but others may require assistance from an authorized provider. By following the maintenance checks in this section as scheduled, you can help ensure your lift chair gives you years of trouble-free operation. If you have any questions regarding your lift chair’s care, contact your authorized provider.
liquids, you should keep electrical connections away from sources of dampness, including direct exposure to water or bodily fluids and incontinence. Check electrical components frequently for signs of damage or corrosion and replace as necessary.
WARRANTY EXCLUSIONS In no event shall WiseLift be liable for any costs or damages, including lost profits or revenues, or any consequential or incidental damages incurred by the consumer. Damages or malfunction resulting in unauthorized repairs will not be subject to factory warranty. Other exclusions to the warranty include damages caused by contamination, abuse, misuse, battery fluid spillage or leakage, improper operation or storage.
Contact a WiseLift representative at 1-877-782-2010 Item # WL450 8201 Eastpoint Dr . Dallas, TX 75227 www.wiselift.com Ver.