User manual

15
Name menu
The name menu allows to change the name of the
receiver (12 case-sensitive alphanumeric characters).
This is the name displayed in the top of the Status display
and it is the name sent to the transmitter with the sync
function (for the transmitter with this advanced
capability).
Use the UP/DOWN buttons to change the selected
character and push SEL button to switch to the next character.
Info menu
the INFO function shows many important features or information of MPR30-IEM receiver:
PARAMETER
example
MEANING
Model
MPR30-
IEM
Wisycom receiver model
Range
470-700
Frequencies range of working
FW
v0.2
Firmware version*
HW
V1
Hardware version
Serial
Q125635
Serial number
Option
N
MPR30 Options
N= freq. range 470 ÷ 700 MHz ,
M= freq. range 566 ÷ 798 MHz
Battery
3.70 Volt
Batteries voltage
BL
V0.4d
Bootloader version
App
V0.77d
Application version
Errors
4
Number of errors.
If the number of errors is > 0 push SEL button to enter on the
Errors list. For each error a brief description and the error code
is showed. For more information, please see the Error List
section.
* The FW (Firmware version) recaps BL (Bootloader Version) and App (Application version).
Preset menu
This menu allows to load/save 6 user presets or load the Factory configuration.
PARAMETER
SETTING
MEANING
Restore
1/2/3/4/5/6/Factory
Select the Restore submenu and chose the presets
to load: user presets or Factory preset. Push and
keep SEL button to load the preset.
Save
1/2/3/4/5/6
Select the Save submenu and chose the user presets
to save. Push and keep SEL button to save the
preset