User manual

18
The frequencies of all the
channels and groups is
equal to the lower
frequency of the receiver
(according to the receiver
470 MHz for MPR30-IEM-N
566 MHz for MPR30-IEM-M)
Error in the channel memory during the
initialization phase.
if the error code 85 appears on
the errors list:
- load a new frequency file
(wdf) in the frequency memory
of the receiver and
- contact Wisycom for more
information
Configuration mismatch
Error in the parameter memory
if the error code 86 appears on
the error list:
- load a preset configuration
using Preset menu and
- contact Wisycom for more
information
If a problem not listed in the above table occurs or if the problem cannot solved with the
proposed troubleshooting, please contact support service at [e-mail] or
[e-mail].
ACCESSORIES AND PARTS
AWNL30
For MPR30-IEM-N
Band 470 ÷ 574 MHz
Antenna Code label 520
AWNH30
For MPR30-IEM-N
Band 574 ÷ 700 MHz
Antenna Code label 634
AWML30
For MPR30-IEM-M
Band 566 ÷ 654 MHz
Antenna Code label 590
AWMH30
For MPR30-IEM-M
Band 654 ÷ 798 MHz
Antenna Code label 725
MPRBAT
Lithium-ion battery pack
CS-KLIC8000 type
Rating: 3.7Vdc @1600mAh (5.9Wh)
MPRCRG
Battery charger
CAUSBM1
Micro USB cable (to configure MPR30-IEM and to recharge lithium battery)
Antenna Code
label