Inc GAS COOK TOPS INSTALLATION INSTRUCTIONS

7
Dimensions in parentheses are in
millimeters unless otherwise specified.
INSTALLATION INSTRUCTIONS
9"*min (229)
CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
18"
(457)
19
1
/4" (489)
COOKTOP CUT-OUT
DEPTH
2
1
/2"min
(64)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
13" max
(330)
30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
2
1
/2"**
(64)
24"min
(610)
*Minimum clearance from both side edges of cooktop cut-out to combustible materials up to 18" (457) above countertop.
**Minimum clearance from rear edge of cooktop cut-out to combustible materials up to 18" (457) above countertop.
4" (102)
10"
(254)
3
1
/2" (89)
E
3
3
/4"min
(95)
G
30-INCH OVEN OPENING
29" (737) COOKTOP
CUT-OUT WIDTH
29" (737)
COOKTOP CUT-OUT WIDTH
FRONT OF COUNTERTOP
2
1
/2"min
(64)
19
1
/4" (489)
COOKTOP
CUT-OUT DEPTH
33" (838) RECOMMENDED
CABINET WIDTH
30"min (762)
Overall Dimensions
Countertop Cut-Out
21"
(533)
O
VERALL
DEPTH
30" (762)
OVERALL WIDTH
4" (102)
INSTALLATION SPECIFICATIONS
The illustrations below provide the overall
dimensions, countertop cut-out and installation
s
pecifications for Model CT30G.
I
MPORTANT NOTE:
3
3" (838) wide cabinets
are recommended for installation of Model
CT30G.
A Wolf 30" (762) single built-in oven may be
installed below Model CT30G. For this installa-
tion, unless you are using cabinets deeper than
24" (610), it is recommended that the electrical
and gas supply be placed in the base cabinet to
the right of the oven. Refer to installation
instructions provided with the built-in oven for
additional specifications.
If the Model CT30G is installed above cabinets,
the gas and electrical placement is not critical.
A
grounded outlet needs to be placed within 4'
(1.2 m) of the right rear of the cooktop.
IMPORTANT NOTE: When multiple cooktop
units are installed side by side, refer to the
c
ountertop cut-out dimensions on page 9.
MODEL CT30G DIMENSIONS
Overall Width 30" (762)
Overall Height 4" (102)
Overall Depth 21" (533)
Recommended
Cabinet Width 33" (838)
Minimum Cabinet Depth
2
2
3
/4" (578)
Minimum Height Clearance 4" (102)
Cut-Out Width 29" (737)
Cut-Out Depth 19
1
/4" (489)
Unit dimensions may vary to
±
1
/8" (3).
INSTALLATION SPECIFICATIONS – MODEL CT30G