Inc Ventilation Hood Installtion Instructions

11
Dimensions in parentheses are in
millimeters unless otherwise specified.
INSTALLATION INSTRUCTIONS
INTERNAL BLOWER
IMPORTANT NOTE: Refer to the installation
instructions provided with the internal
b
lower for additional mounting and wiring
instructions.
LBLOWER-120INT INSTALLATION
Slide the blower mounting tab into the
hood liner top plate mounting slot. Make
sure the blower tab and mounting slot are
aligned properly front to back.
Secure the blower with the weld stud at the
front of the blower and hood liner top plate
with the nut (included with the blower).
Verify that the blower discharge aligns with
the top plate discharge cut-out of the hood
liner.
Once the hood liner installation is complete,
plug the blower power cord(s) into recepta-
cle(s) located near the center of the hood
liner shell. Use the clips on the interior of
the hood liner to keep excess power cord
away from moving parts.
IMPORTANT NOTE: Before turning the power
on to the ventilation hood liner, make sure the
b
lower is off.
I
MPORTANT NOTE:
U
se wire connectors or
wire nuts approved by UL or C/UL.
Mounting
Slot
Nut
Liner
Top and
Back Plate
Weld Stud
Blower
Housing
Mounting
Tab
Internal blower installation