Operating instructions

Maintenance

General

1 Attention! Reverse blade

Before all maintenance and cleaning work:

z Pull out the power plug.

z Do not touch moving blades.

Cleaning

z Clean the hedge shears with a dry towel, particularly the ventila-

tion slits, after each use or using a brush in the case of heavy

soiling.

z Spray the blades with oil after each use.

z Under no circumstances spray the hedge shears off with water.

Storage

z Store the hedge shears in the blade scabbard provided.

– For easy storage the blade scabbard can be mounted on the

wall .

– We recommend using the drill template (see page 86) for

simple wall-mounting of the blade scabbard.

z Store the hedge shears in a dry location out of the reach of

children.

Fixing problems

Warranty

The warranty rules issued by our company or the importer apply to

every country. As part of the warranty, we remedy malfunctions on

your appliance free of charge provided that this malfunction is

caused by a material or manufacturing defect. In the event of a war-

ranty claim, please turn to your dealer or the nearest branch office.

Problem Possible cause Solution

Blade gets hot.

• Blunt blade. • Go to a WOLF-Garten Service location.

• Too much friction due to inadequate lubrication • Oil blades

Motor does not run. • Not connected to voltage supply

• Check the power supply and have electrician per-

form repairs if necessary.

Jittery operation, hea-

vy vibration of the de-

vice

• Blade damaged • Go to WOLF-Garten Service location.

• Blade not firmly in stabilizer. • Go to WOLF-Garten Service location.

When in doubt, always seek out a WOLF-Garten Service location.

1 Before checking the hedge trimmer or carrying out work on the blade, remove the battery.