Operation Manual

13
Before cutting
• These rechargeable shears, with the shear blades
Accu 8 EM / 10 EM are for maintaining lawn edges
as well as small areas of lawn on private property
and should not be used for public facilities, parks,
sporting fields, streets etc.; they also should not be
used for agricultural or forestry applications.
• These rechargeable shears in conjunction
with the shrub blade Accu BS EM is for the
maintenance of hedges and shrubbery as on
private property and should not be used on
public facilities, parks, sporting fields, streets etc.
They should also not be used for agricultural or
forestry applications.
• Because of the hazard of bodily injury to the user
rechargeable shears should not be used:
- for trimming bushes, hedges, and shrubbery
(applies only for trimming blades Accu 8 EM /
10 EM),
- for pulverizing in the sense of composting.
• For safety reasons persons under 16 years of
age and persons that are not familiar with the
operation may not use these rechargeable shears.
• The device may not be operated if people
(especially children) or animals are in the
immediate vicinity; you are responsible for
damages.
• Only use the battery powered shears in daylight
or with good artificial lighting.
• Before trimming lawn areas or lawn edges remove
foreign objects such as branches/ rocks, wire, etc.
• While trimming please watch out for foreign
objects. If an immovable object blocks the blade,
then turn off the shears immediately and remove
the object.
• Inspect the tool:
a) To ensure that the handle is firmly seated
and for,
Safety instructions
This machine can cause serious injury! Read the operating instructions carefully and familiarize yourself
with all the operating elements and with the correct use of the device. The user is responsible for accidents
involving other people or their property. Pay attention to the instructions, explanations, and regulations.
Symbol denition
b) Damages or excessive wear
Attention! If damaged the device may not be
used until it has been repaired.
• Follow the assembly instructions for replacement.
• Only use spare parts and accessory parts as
recommended by the manufacturer.
Charging shears
• Do not charge the device outside.
•
The device may not be charged while in operation.
• Use only the original WOLF charger (part
number 7085 068).
When trimming
• Only turn the motor on when hands and feet are
not in the vicinity of the cutting head.
•
Even when the battery is empty an injury hazard
still remains through a residual charge.
• The switching mechanisms installed on the device
may not be removed or bypassed, for example
binding the handle or taping down the safety button.
• Always wear suitable work clothes, no loose clothes
etc. that could be snagged by the cutting tool. Wear
sturdy shoes with good tread! Also protect your
legs (for example by wearing long pants), and your
hands (gloves), wear protective goggles!
After cutting
• Maintenance and cleaning work on the device may
only be executed when the motor is not running.
• Clean and lubricate the blades (with Vaseline)
after each cutting.
• Repairs to the device may only be carried out
by WOLF service centers and authorized repair
centers.
• Chargers that have become wet may not be
plugged into an electrical outlet until they are
dry. Otherwise the shears should be charged
after each trimming (only in a dry room.
Remove the
extansion
handle before
maintenance,
storage or leaving
the machine
unattached.
Tool is coasting
Wear
protective
goggles
Keep third
parties out of
the hazardous
area!
Warning!
Read the
operating
instructions before
placing in service!
Do not
expose to
rain!