Operation Manual

14
15
Operating times
Please convider the individual country
spezification.
Charging
A
The shears must have been charged for
> 5-6 hours before their first use. For
charging - plug the charger in a 230-volt
AC outlet (red lamp lights up) and plug the
charger plug into the charge socket of the
rechargeable shears.
Attention! Only use the charger in dry rooms!
Please note:
• Please disconnect the charger from the
battery shear whilst the charger is not
in use. Failure to do so will cause the
batteries to run down unnecessarily.
• In the interest of long battery service life,
the device should not be connected to
the charger longer than is necessary.
• Always store the shears in a dry room out of the
reach of children in such a way that the cutting
head is protected.
Charger
• The charger may only be used in dry rooms.
• Unplug cable connections only by pulling on the
plug. Pulling on the cable could damage cable
as well as plug and electrical safety could not be
guaranteed.
• Never use the charger if cable, plug, or the
device itself have been damaged through
external influence. Bring the charger to the
nearest repair shop.
• Under no circumstances should you open the
charger. In case of a malfunction take the device
to a repair shop.
Battery
• As a result of incorrect use, uid can leak from
the rechargeable battery. Avoid contact with the
uid. In case of accidental contact, rinse with
water. In case of uid contact with the eyes,
seek medical aid. Leaking battery uid can
cause irritation of the skin or burns.
• Danger of fire! Never charge batteries in the
vicinity of acids or easily flammable materials.
- Do not operate battery-powered shears while
the battery is charging.
- Charge battery only at a temperature between
10 - 45 °C. After a heavy load, first allow the
battery to cool.
Safety instructions
Operation
• The rechargeable shears should not
be charged prior to long periods when
it will not be used, and it should not be
charged intermittently in winter.
• The charging time for a completely
discharged battery is 5-6 hours.
•
The lithium-ion rechargeable battery can be
charged at any charge level and charging
can be interrupted at any time without
damaging the battery (no memory effect).
Adjusting the cutter head
B
Slide the lock button up (1) and then turn
the cutter head to the desired position (2).
Release the button (1) and check whether
the cutter head is locked in place.
Please note:
The cutter head can be locked in five
positions (90° « 45° « 0° » 45° » 90°).
Disposal
• Do not dispose of electrical equipment
in domestic waste. Recycle equipment,
accessories and packaging in an
environment-friendly manner.
• Danger of explosion! Protect battery-powered
shears from heat and re.
- Do not place on heating units or expose to
strong sunlight for an extended period.
- Operate the battery-powered shears only at
temperatures between -10 °C to + 45 °C.
Dispose of batteries in an environmentally
responsible manner
• WOLF batteries are Li-ION
rechargeable batteries, and therefore
must be disposed of in accordance
with waste disposal regulations.
Return defective batteries to your
dealer for disposal. Batteries must be
removed from the appliance before it is scrapped.
• WOLF batteries are best suited for battery-
powered electric appliances, according to the
state of the art. Li-ION batteries are harmful
to the environment if disposed of with other
household waste.
• WOLF Garten would like to encourage
environmentally friendly consumer attitudes.
Working together with you and WOLF dealers
we guarantee the acceptance and recycling of
used batteries.