Operation Manual

16
17
Maintenance
Replace batteries
1. Remove cover
L
Place a coin in the cover slot and press
in the direction of the blade (1). Remove
the cover from above (2).
2. Replace batteries
M
Remove both plugs from the batteries
(3); remove the batteries from the
shears. Place the new batteries in the
shears and connect the two plugs.
3. Fastening the cover
N
Push the lid with the projection (4) under
the edge of the shears and then press
the cover on the shears (5).
Note: Please ensure that no cable
protrudes from the shears when fastening
the cover!
Spare parts
Technical data
Power 60
plus
Power 80
plus
Power 100
plus
Power BS 80
plus
Noise measurement at operator ear
level in accordance with EN 836.
Lp = 72 dB
(A)
Lp = 72 dB
(A)
Lp = 72 dB
(A)
Lp = 72 dB
(A)
Vibration measured at the handle
with operator according to EN 1033.
The assessed acceleration typically
amounts to:
< 2,5 m/s
2
< 2,5 m/s
2
< 2,5 m/s
2
< 2,5 m/s
2
Order description Item number. Product information
AC-TS
Telescopic handle
7095 000
Continuously adjustable from 85-120 cm.
Result: convenient trimming without stooping.
(Power 60 plus, 80, 100, BS 80)
Accu 8 EM
Shear blade
7084 095 Cutting width 80 mm (Power 60 plus, 80, 100, BS 80)
Accu 10 EM
Shear blade
7085 095 Cutting width 100 mm (Power 60 plus, 80, 100, BS 80)
Accu BS EM
Shrub blade
7095 095 Length 170 mm (Power 60 plus, 80, 100, BS 80)
AC-R
Replacement blades
7084 094
Result: The wheels achieve a consistent cutting height
(Power 60 plus, 80, 100)
Accu
7084 918
7085 918
7086 918
Power 60 plus
Power 80 plus
Power 100 plus, BS 80
Charger 7085 068 Power 60 plus, 80, 100, BS 80