Use & Care Guide

8 | Wolf Customer Care 800.222.7820
OVEN OPERATION
Oven Operation
TIME
It is very important the correct time is set if a timed cook
feature is used. Time must be reset after a power outage.
Setting time:
1 With oven off, press TIME.
2 Turn knob to set the hour, then press OK.
3 Turn knob to set the minutes, then press OK.
TIMER
The timer can be set for a maximum of 9 hours and 59 min-
utes. Once the timer is set, the countdown is illuminated on
the display. The timer is independent from the oven. Setting
the timer does not affect operating time or switch-off time.
Setting timer:
1 Press TIMER.
2 Turn knob to set duration, then press OK.
To reset, press TIMER and turn the knob to select desired
duration, then press OK. To cancel, press TIMER twice, then
press OK.
OPERATING TIME
The operating time feature automatically turns the oven off
at a specied time. The oven will begin to heat immediately
and will turn off at the desired switch-off time.
If the temperature probe is used, the probe will override the
switch-off time and turn the oven off when set temperature
is reached.
Setting controls:
1 Select desired cooking mode and temperature.
2 Press TIME.
3 Turn knob to select desired operating time, then
press OK.
To adjust the operating time, press TIME and turn the knob
to select the desired time, then press OK.
DELAYED START
The delayed start feature automatically turns the oven on
and off at specied times. The oven will remain idle until the
desired start time and will turn off at the desired switch-off
time. The clock must be set to the correct time for delayed
start to function properly.
If the temperature probe is used, the probe will override the
switch-off time and turn the oven off when set temperature
is reached. If the probe temperature is not reached before
the switch-off time, it will not extend operating time.
Setting controls:
1 Select desired cooking mode and temperature.
2 Press TIME and turn knob to select desired operating
time (do not press OK).
3 Press TIME and turn knob to select desired switch-off
time, then press OK.
To adjust the switch-off time, press TIME twice and turn the
knob to select the desired time, then press OK.