Installation Guide

WOODBRIDGE

www.woodbridgebath.com

FREESTANDING FAUCET

WOODBRIDGE

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS FOR FLOOR MOUNT TUB FILLER FAUCET

BEFORE BEGINNING INSTALLATION:

1. Open the package and inspect the faucet for any defect or missing parts prior to installation.

2. This faucet should be located away from traffic areas; impact both by foot traffic or floor cleaning

equipment may damage the faucet and might cause a leak which result in water damage.

3. Please read this installation instruction throughhly, make sure that you have all the required tools

and supplies needed to complete this installation.

4. Due to the applicationa and design of this faucet, extensive consideration should given to its

installation.

5. Flush all supply lines prior to installation.

6. Shut off both HOT and COLD supply line after flushing.

Step 1: Insert the faucet tube into the base cover. Step 2: Thread the tube onto the mounধng tripod.

Step 3: Hand ধghen the hot and cold ﬂexible water supply line

onto faucet body.

DO NOT USE wrench or Spanner to ধghten as it could damage

the O-Ring on the supply lines. The ﬂexible supply line are to

be ﬁħed onto correct inlets for Hot and Cold water.

Step 4: Insert faucet body assembly onto the faucet tube from

the top and hand ধghen it.Make sure the ﬂexible water supply

lines go through the tube smoothly.