Installation Guide

ManualsBrandsWOODBRIDGE ManualsBathRevel II 1-Piece 1.1GPF/1.6 GPF Dual Flush Elongated Toilet with Non-Electric Bidet Seat in White

WOODBRIDGE

2020411 REV. 1

WOODBRIDGE

Customer Service Phone: 562-229-0088. (Monday - Friday 9 AM - 5 PM Pacific Time)

Or Email: help@woodbridgebath.com

INSTALLATION MANUAL BID21

www.woodbridgebath.com

NON-ELECTRONIC BIDET SEAT

Thank you for choosing our Quiet-close toilet seat.

We will try our effort to offer you the best service.

Our craftsmanship offers you a rare combination

of water-saving，intelligent，hygiene sanitary and

graceful appearance that will satisfy you in future

use .The quality and dependability of our toilet seat

will surpass your highest expectations.We’re very

proud of our products and we know you will be too.

Please take a few minutes to study this manual.Pay

special attention to the Care and Cleaning instructions.

All in formation in this manual is based upon the latest

product information available at the time of publication.

We constantly strive to improve the quality of our

products. We reserve the right to make changes in

product characteristics，packaging or availability at

any time without notice.

Water pressure range:

Minimum water pressure 0.07MPa(20L/min.flowing

pressure).

Maximum water pressure 0.8MPa(Hydrostatic pressure)

Woodbridg ereserves the right to change marked dimensions without prior notice.

Reference Value

19 1/4"

17 1/8"–18 1/4"

11 3/8"

14 1/8"

8 1/4"

5 1/4"– 6 1/2"

Summary of content (4 pages)

PAGE 1
INSTALLATION MANUAL BID21 WOODBRIDGE R NON-ELECTRONIC BIDET SEAT Thank you for choosing our Quiet-close toilet seat. We will try our effort to offer you the best service. Our craftsmanship offers you a rare combination of water-saving，intelligent，hygiene sanitary and graceful appearance that will satisfy you in future use .The quality and dependability of our toilet seat will surpass your highest expectations.We’re very proud of our products and we know you will be too.
PAGE 2
WOODBRIDGE R Care and Cleaning Inlet filter cleaning 1.Shut off water supply valve and remove water supply hose. 2.Remove the filter. Use the brush to clean the filter. 3.Put the filter back into inlet after cleaning.Then connect the water supply pipe. Use the brush to clean the filter Remove the filter DISASSEMBLY Quick-release button Disassembling of seat cover 1 Press quick-release button, and take out the seat cover by hands as the drawing. www.woodbridgebath.
PAGE 3
WOODBRIDGE R Care and Cleaning Remark: Do not stand or place heavy objects on the seat cover. Do not open/close the seat cover using excessive force. (Doing so may cause crack.). Do not expose the product to direct sunlight. Clean the outside surface of your toilet seat with mild soap and warm water. Wipe the entire surface completely dry with a clean,soft cloth.You may use soft abrasive cleaners when necessary to clean your toilet seat.
PAGE 4
WOODBRIDGE R Installation of seat cover. 2 Mounting board Seat cover Place the seat cover on the surface of toilet, then push mounting board as the drawing, until the seat cover fasten into mounting board. If the seat cover is not assembled in the correct position, please disassemble the seat cover and adjust the mounting board. 3 Installation of hose. Hose Water filling hole According to the drawing, connect three-way valve to the water filling hole,then connect the hose with three-way valve.