Owner Manual

WOODBRIDGE

www.woodbridgebath.com



1. The main unit buzzer beeps once, and the knob (button) starts self-test after the white light flashes.

2. The main unit buzzer beeps again, and the self-test is completed, and the knob (button) lights up

in white;

3. The function mode is turned on and in normal use.

Preparation for Start-Up

1. Turn on the angle valve

3. Safety self-test

Check the tightness of the threaded connection to ensure that there is no water leakage. Turn

the angle valve counterclockwise to adjust the opening to the maximum.

(Tips: when the valve is opened for the first time, the angle valve handle has a large torque)

2. Power Connection

Insert power line leakage protection plug into the power socket, press the reset switch, plug

indicator lights on indicating that the power is on.

Tips:

Press electric leakage test button prior to usage,

the reset switch pops up indicating that the leakage

protection function is normal.

Electric leakage

test button

Reset switch

Indicator light

Press the TEST button (then RESET button) every

month to assure proper operation.

Angle valve