365 Deluxe Cabinet Please Read Carefully! Part# CAB050 Description 1/4" Screw Qty. 18 Part# CAB045 Description Drawer Pull Qty. 9 Part# STP001 Description 3/4" Screw Qty. 8 Part# 5620B Description T-Nut Qty. 4 Part# CAB040 Description Leg Leveler Qty. 4 Part# SPB005 Description 3/4" Screw Qty. 4 Router Table, Fence & Accessories Not Included 1 Part# CAB060 Description Door Catch Qty. 3 Part# CAB055 Description Door Hinge Qty. 3 Part# CAB010 Description Angle Bracket Qty.
BEFORE BEGINNING Identify and verify that you have all the parts listed. Read the instructions at least once, familiarizing yourself with the parts, before beginning. Tools needed for assembly are a Phillips screwdriver, assorted clamps, glue, screws or nails (if desired) and finishing supplies. Dry fit the various assemblies to avoid any problems during glue-up. Arrange the parts like the illustration on page 4 to speed assembly time.
end 1", centered side to side and drill a 5/16" diameter x 1" deep hole. Insert the T-nuts (5620B) into the 5/16" holes, screw leg levelers (CAB040) into them. Turn the cabinet over and glue the skids (use nails or screws if desired) on the outside edges of the cabinet bottom, then turn the cabinet right side up. See fig. 6. 6 Step 7: Plan where you would like an access hole for the router cord. The hole needs to go in the upper back panel.
365 Parts All 365 parts shown on this page are 18mm ply except for the backs (1/4" MDF), 6 drawer bottoms (1/4" MDF) & 6 pairs of drawer sides (12mm ply - not shown).
