Company Brush Cutter User Manual

Safety 11
MAN0963 (2/16/2012)
4 - PN 18869
SHIELD MISSING
DO NOT OPERATE - PUT SHIELD ON
18869-B
DANGER
BE CAREFUL!
Use a clean, damp cloth to clean safety decals.
Avoid spraying too close to decals when using a pressure
washer; high-pressure water can enter through very small
scratches or under edges of decals causing them to peel
or come off.
Replacement safety decals can be ordered free from your
Woods dealer. To locate your nearest dealer, check the
Dealer Locator at www.WoodsEquipment.com, or in the
United States and Canada call 1-800-319-6637.
MODEL NO. SERIAL NO.
Woods Equipment Company
Oregon, Illinois, U.S.A.
2 - FRONT AMBER REFLECTOR
(PN 1002940)
3 - REAR RED REFLECTOR
(PN 57123)
1 - SERIAL NUMBER PLATE
PN 1006348 - Located on Wheel Rims
SAFETY & INSTRUCTIONAL DECALS
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Replace Immediately If Damaged!