Instruction manual

The following is a description of the components
shipped with the Shop Fox
®
W1679. It is recom-
mended that the components be laid out in a
similar fashion to those in Figure 9. This will
help in identification before beginning assem-
bly. Should any part be missing, examine the
packaging carefully. If any key parts are missing,
find the part number in the back of this manual
and call Woodstock International, Inc. at 360-
734-3482 or e-mail at: tech-support@woodstock
-
int.com.
1. Cabinet Stand 1
2. Table Assembly 1
3. Fence Assembly 1
4. Push Blocks 2
5. Cutterhead Guard 1
6. Fence Support Key 1
7. Dust Port 1
8. Fence Tilt Knob
3
⁄8"-16 x 2
3
⁄4"1
9. Lock Knob
1
⁄2"-12 X 3
3
⁄4"1
Special Nut
1
⁄2"-12 1
Flat Washer
1
⁄2" 1
10. V-Belt A-36 1
11. Belt Cover 1
12. Hardware Bags:
Hex Bolts
3
⁄8"-16 x
3
⁄4"3
Lock Washers
3
⁄8"3
Hex Nuts
5
⁄16"-18 4
Hex Washers
5
⁄16"8
Phillps Head Screws
5
⁄16"-18 x
1
⁄2"4
Knife Setting Gauge Kit 1
Item Qty.
Figure 9. Jointer components removed from
the boxes and laid out for identification.
ASSEMBLY
-10-
Unpacking
Box Contents
The Model W1679 has been carefully packaged
for safe transporting. If you notice the machine
has been damaged or is missing any parts,
please contact Woodstock International Service
and Support at 1-360-734-3482 or send e-mail
to: [e-mail]
.
Seek lifting assistance
before beginning assem-
bly. The Model W1679 is
a heavy load at 235
pounds.
ASSEMBLY INSTRUCTIONS
Read and understand this
entire instruction manual
before performing any
operations with your
machine. Otherwise, seri-
ous personal injury may
occur if safety and opera-
tional information is not
understood and followed.
Do not risk your safety by
not reading!
1
2
3
4
5
7
6
8
9
10
12
11