Instruction manual

SAFETY
-4-
READ MANUAL BEFORE OPERATING MACHINE.
FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL
RESULT IN PERSONAL INJURY.
SAFETY
Standard Safety Instructions
1. Thoroughly read the instruction manual before operating your machine. Learn the applications,
limitations and potential hazards of your machine. Keep this manual in a safe, convenient place for
future reference.
2. Keep the work area clean and well lighted. Clutter and inadequate lighting invite potential haz-
ards.
3. Ground all tools. If a machine is equipped with a three-prong plug, plug it into a three-hole ground-
ed electrical outlet or grounded extension cord. If using an adapter to aid in accommodating a two-
hole receptacle, ground using a screw to a known ground.
4. Wear eye protection at all times. Use safety glasses with side shields or safety goggles that meet
the national safety standards, while operating this machine.
5. Avoid dangerous environments. Do not operate this machine in wet or open flame environments.
Airborne dust particles could cause an explosion and severe fire hazard.
6. Ensure all guards are securely in place and in working condition.
7. Make sure the power switch is in the “OFF” position before connecting power to machine.
8. Keep the work area clean, free of clutter, sawdust, dirt or grease.
9. Keep visitors at a safe distance away while operating this machine.
10. Childproof the workshop with padlocks, master switches or by removing starter keys.
11. Disconnect the machine when cleaning, adjusting or servicing.
Indicates an imminently hazardous situation which, if not avoided, WILL
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, COULD
result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, MAY
result in minor or moderate injury, or MAY result in property damage.
This symbol is used to alert the user to useful information about proper
operation of the equipment.
NOTICE