Other Content

To remove the parallel guide, loosen the screw at the front of the base plate and slide the guide
out.
 How hard is it to change blades on the 4-1/2" WorxSaw Compact Circular Saw?
Changing the blades is quick and easy. Unplug the WorxSaw to avoid accidental starts.
Press the red spindle lock button behind the blade housing and insert the allen key into the hex
bolt holding the blade in place. Unscrew and remove the blade bolt, and the outer flange.
Remove the old blade and insert the new one. Once firmly seated, install the flange and blade
bolt, finger tightening into place. Use the allen key to secure the bolt, re-install the battery, and
you’re ready to go.
 Can I attach a vacuum to the 4-1/2" WorxSaw Compact Circular Saw?
Yes, the WorxSaw has an onboard vacuum port and comes with a vacuum adaptor so you can
attach your favorite shop vac. It’s as easy as installing the adaptor in the port, attach the shop vac
and turn it on. (See your owner’s manual for specific instructions.)
 I’m squeezing the on/off switch on my WorxSaw, but it won’t start. What do I do?
Worx tools are designed with safety features to protect you against accidental starts, and the
WorxSaw is no different. In front of the on/off switch is a safety switch which must be engaged
before the on/off switch will work. To engage it, pull the red switch back towards the on/off
trigger and hold it in place while you squeeze the on/off trigger. Once the saw starts, you can
release the safety switch and the saw will continue to run.