User's Manual

Chain Saw ENChain Saw EN
1514
W
Y
Z
X
2”
2”
2
2/3
1
1/3
1
2
2/3
1/3
22
3
When the log is supported on both ends, as
illustrated in Figure Q, cut 1/3 the diameter
from the top (overbuck). Then make the
finished cut by underbucking the lower 2/3 to
meet the first cut.
W
Y
Z
X
2”
2”
2
2/3
1
1/3
1
2
2/3
1/3
22
3
When bucking on a slope always stand on the
uphill side of the log, as illustrated in Figure R.
When “cutting through”, to maintain complete
control release the cutting pressure near the
end of the cut without relaxing your grip on
the chain saw handles. Don’t let the chain
contact the ground. After completing the cut,
wait for the saw chain to stop before you
move the chain saw. Always stop the motor
before moving from tree to tree.
W
Y
Z
X
2”
2”
2
2/3
1
1/3
1
2
2/3
1/3
22
3
SYMBOL
To reduce the risk of injury, user
must read instruction manual
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Do not expose to rain
Remove plug from the mains
immediately if the cable is
damaged or cut.
Contact of the guide bar tip with
any object should be avoided
Tip contact can cause the guide
bar to move suddenly upward and
backward, which can cause serious
injury
Always use two hands when
operating the chain saw
1
0
m
Wear head protection
protective gloves
Protective gloves
Warning of danger from overhead
electric-power lines