Operation Manual

Cordless Li-Ion Blower/Sweeper EN
6
TECHNICAL DATA
Type WG549E WG549E.3 WG549E.5 WG549E.9 (520-559-designation of machinery,
representative of Cordless Blower Vacuum)
WG549E WG549E.3 WG549E.5 WG549E.9
Voltage 20V
Max* Lithium
No load speed 12500/min
Blow speed 200km/h
Charging time 3hr approx. 2hr approx. 1hr approx. /
Machine weight 1.6kg 1.9kg 1.6kg 1.2kg
*Voltage measured without workload. Initial battery voltage reaches Maximum of 20volts.
Nominal voltage is 18volts.
NOISE INFORMATION
A weighted sound pressure L
pA
:74dB(A)
A weighted sound power L
wA
:85dB(A)
K
pA
& K
wA
3.0dB(A)
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745
Typical weighted vibration 1.96m/s²
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials is cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool