Cordless Drill / Driver Perceuse/tournevis sans Taladro inalambrico EN P05 F P13 ES P22 WX176L WX176L.1 WX176L.2 WX176L.
10 9 1 2 3 8 4 7 5 6
A1 A2 2 1 A3 B 1 2 3 C D 2 2 1 2 1 3 E1 E2
E1 E2 E3 F G 1 2 3 4 5 6 7 8 9 10 11 = H
1. TWO-SPEED GEAR CONTROL 2. FORWARD/REVERSE ROTATION CONTROL 3. ON/OFF SWITCH 4. SOFT GRIP HANDLE 5. BATTERY PACK 6. BATTERY PACK RELEASE BUTTON 7. ELECTRONIC TORQUE-ADJUSTING DIAL 8. COLLET LOCKING SLEEVE 9. DUAL CHUCK RELEASE BUTTON 10. LED LIGHT TECHNICAL DATA WX176L WX176L.1 WX176L.2 Charger voltage 100-240V~50/60Hz Rated voltage 20V No load speed Max* 5 0-400/0-1500/min Clutch positions 11+1 Max torque 265 in.lbs Chuck capacity Max. drilling capacity WX176L.
ACCESSORIES WX176L WX176L.1 WX176L.2 WX176L.9 Battery pack (WA3520) 2 2 1 / Charger (WA3742) 1 1 1 / 1/4” Hex shrank HSS drill bit 2 / / / 2” Screwdriving bit 1 / / 1 16pc accessory kit / / 1 / 67pc accessory kit / 1 / / Not all the accessories illustrated or described are included in standard delivery. We recommend that you purchase your accessories from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name.
WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints; • Crystalline silica from bricks and cement and other masonry products and • Arsenic and chromium from chemicallytreated lumber. Your risk from these exposures varies, depending on how often you do this type of work.
c) d) e) f) 8 g) protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on.
medical help. Liquid ejected from the battery may cause irritation or burns. 6. SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. DRILL SAFETY WARNINGS 1. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. 2. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring.
SYMBOLS To reduce the risk of injury, user must read instruction manual Wood Warning Metal Wear ear protection High speed Wear eye protection Low speed Wear dust mask Wear protective gloves 10 Do not expose to rain or water. Do not burn Li-I on POSITEC Inc. has established a partnership with the RBRC Corporation to recycle any Positec batteries with the RBRC-call2recycle seal. For environmental protection, please do not discard batteries in the trash.
OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. INTENDED USE The machine is intended for drilling (including pilot hole) in wood, metal and plastic as well as for driving and removing fasteners. ASSEMBLY AND OPERATION ACTION FIGURE BEFORE OPERATION Removing the Battery Pack See Fig. A1 Charging the Battery Pack More details can be found in charger’s manual See Fig. A2 Installing the Battery Pack See Fig. A3 ASSEMBLY Inserting the Bits See Fig.
DISPOSAL OF AN EXHAUSTED BATTERY PACK To preserve natural resources, please recycle or dispose of the Battery Pack Li-Ion properly. This Battery Pack contains Lithium batteries. Consult your local waste authority for information regarding available recycling and/or disposal options. Discharge your Battery Pack by operating your drill, then remove the Battery Pack from the drill housing and cover the Battery Pack connections with heavy-duty adhesive tape to prevent short circuit and energy discharge.
www.worx.com Copyright © 2015, Positec. All Rights Reserved. Copyright © 2015, Positec. Tous droits réservés. © Derechos reservados 2015, Positec. Todos los derechos reservados.