Use and Care Manual

1051 Lea Drive, Collegeville, PA 19426  P: [phone] F: [phone]  www.wsbathcollections.com
 Like many metallic surfaces, your stainless steel sink will scratch. These are merely
usage scratches and over time will blend into the overall finish of your sink.
 Heavy salt concentration or foods containing high levels of salt should not be allowed to
dry on the sink surface. Rinse your sink thoroughly after use.
Natural Stones
Stones not only look beautiful, it is hard and durable. All stones have an absorption factor. Tap
water contains chemicals (chlorine, fluoride, purifiers) minerals and salts that may penetrate the
stone and cause discoloration. To guarantee its long-lasting beauty, a preventative maintenance
program is needed. Please follow our easy maintenance instructions.
 Clean stubborn spots with a non-abrasive liquid or paste polish.
 These basins/sinks/ tubs are honed and sealed.
 Apply stone/ marble seal every 3-5 yea or whenever necessary. This will help lower the
absorption of liquids. We recommend Masterpiece Stone/ Marble Care Products.
 To clean stains or spots we recommend you call a local marble maintenance repair
company. See your Yellow Pages Directory.
 Never use cleaners with abrasives, soft scrub, and Clorox or Drano type products on these
finishes.
Wood
Wood is a living material, provided with the benefits of nature. The fine-pored and skin-friendly
surface provides easy care and hygienic cleanliness. Wood needs correct treatment and some
care. To keep your bathtub beautiful: KEEP THEM CLEAN AND DRY. Use clean soft cloth.
We recommend re-oiling the wooden bath furniture as necessary whenever the water does not roll
off again. Guideline: If the water rolls off the wood, it is still protected sufficiently by the oil. If
the water does not roll off any more, you have to re-oil it.
Cleaning
 For cleaning we recommend herbal soap. Such soap should be massaged in the wood in
pure form and flushed with abundant water.
 Clean stubborn spots with a none-abrasive liquid or paste polish. Use water and liquid
non-ammoniated pure soap.