Data Sheet

DATEFILEREV
BY
Date
Checked
Drawn
Name
Scale
DESCRIPTION
Position
GENERAL TOLERANCE
DIN ISO 2768 T1m
Basic material
Projection
Drawing.- No.
A4
SIZE
WS-PBTL 15x15mm Push Button Switch with integrated LED, THT
version
465 RG 111 72501
13-10-01
Fandrey
SwPBTL
1:1
System: Solid Edge ST4
13-10-01
Hsu
Scale - 1:1
This electronic component is designed and developed with the intention for use
in general electronics equipments.
Before incorporating the components into any equipments in the field such as
aerospace, aviation, nuclear control, submarine, transportation, (automotive
control, train control, ship control), transportation signal, disaster prevention,
medical, public information network etc. where higher safety and reliability are
especially required or if there is possibility of direct damage or injury to human
body, Wurth Elektronik must be asked for a written approval.
In addition, even electronic component in general electronic equipments, when
used in electrical circuits that require high safety, reliability functions or
performance, the sufficient reliability evaluation-check for the safety must be
performed before by the user before usage.
11,56,0 8,0
5,08
4,5
12,7
7,62
12,7
O 0,5
15,0q
0,5 0,4
19,53,6
1,34xO
P.C.B Layout
5,08
7,62
12,7
4,5
12,7
O 0,802x
O 0,703x
O 1,304x
1,8
2,6
2,2
3,0
L1
L2
Part number Force Color of LED Function Schematic Life Cycle
465 RG111 72501 200g ± 80g Red/Green Momentary SPST 1.000.000
LC
1
2
Circuit Diagram
L1
L2
LC
Red
Green
LED Schematic
Switch
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Rating: 100mA 12VDC
>Contact Resistance :
Initial : 200mΩ max.
After Life Test : 300mΩ max.
>Insulation Resistance : min. 100MOHM at 500VDC
>Dielectric Strength : 500VAC for 1 minute
>Pre-Travel: 2.7 ±0.3mm
>Total-Travel: 4.5 ±0.3mm
>Actuation Feedback: non-tactile
>Actuator function: auto-return
MATERIAL
>Actuator: POM UL HB
>Actuator Fixture : PA66 UL HB, color Black
>Frame : PA66 UL HB, color Black
>Stationary Board: PA66 UL HB
>Stationary Contact : Brass with Gold
>Moving Contact : Bronze with Gold
>Spring: Carbon Steel
>PCB : FR4 Epoxy Resin
>Switch Terminal : Brass with Tin
>LED Terminal : Copper plated steel with Tin
SOLDERING INFORMATION
>Terminal in THT version
> Wave soldering 260°C 10sec. max
>Hand soldering under 350°C for 3sec. max
ENVIRONMENTAL
Storage condition : -40°C ~ +85°C ,60% RH max.
Operation condition : -40°C ~ +85°C
Compliance : ROHS, Reach
HANDLING ADVISE
>ESD prevention methods need to be applicated for manual
handling and processing by machinery
>Resistors for protection are obligator
PACKAGING INFORMATION
>ESD Tray
A
detail A
1 2
11,50
23
714 659 001 100
465 RG111 72501