Installation Sheet

WC-2929-60-DBL
Installation Guide
6-8mm
INSTALLATION INSTRUCTIONS
1
4
Install the counter. Seal around the top of the cabinet
with clear silicone sealant. Do not over apply. Allow to
dry 24 hours for proper curing.
2
Install the mirror: use a pencil to mark the placement
of the screw holes on the wall, drill the holes and insert
the plastic wall anchors.
Remove the handles from inside the cabinet doors and
drawers and reinstall on the outside. Do not over tighten
when reattaching.
3
Install the screws into the wall anchors, leaving enough
of the screw exposed to hang the mirror - approx 1/4” -
1/2”.
HOW TO ADJUST DRAWER SLIDES (if required)
Up and Down Adjustment
Mark the screw position
Diameter 6mm
Depth 40 mm
Draw horizontal line