Corp. Network Router User's Manual

5
2 Installation
2.1 Hardware Installation
Step 1: Place the Wireless LAN Broadband Router to the best optimum
transmission location. The best transmission location for your X-Micro
WLAN 11g Broadband Router is usually at the geographic center of your
wireless network, with line of sign to all of your mobile stations.
Step 2: Connect the X-Micro WLAN 11g Broadband Router to your wired network.
Connect the Ethernet WAN interface of X-Micro WLAN 11g Broadband
Router by category 5 Ethernet cable to your switch/ hub/ xDSL modem or
cable modem. A straight-through Ethernet cable with appropriate cable
length is needed.
Step 3: Supply DC power to the X-Micro WLAN 11g Broadband Router. Use only
the AC/DC power adapter supplied with the X-Micro WLAN 11g
Broadband Router; it may occur damage by using a different type of
power adapter.
The hardware installation finished.
2.2 Software Installation
¾ There are no software drivers, patches or utilities installation needed, but
only the configuration setting. Please refer to chapter 3 for software
configuration.
Notice: It will take about 55 seconds to complete the boot up sequence
after powered on the X-Micro WLAN 11g Broadband Router;
Power LED will be active, and after that the WLAN Activity LED
will be flashing to show the WLAN interface is enabled and
working now.