Corp. Network Router User's Manual

17
transmission.
Refer to 4.13 What is Preamble Type?
Broadcast SSID Click to enable or disable the SSID broadcast
function.
Refer to 4.14 What is SSID Broadcast?
IAPP Click to enable or disable the IAPP function.
Refer to 4.20 What is Inter-Access Point
Protocol(IAPP)?
802.11g Protection Protect 802.11b user.
RF Output Power To adjust transmission power level.
Turbo Mode
Click to Enable/Disable turbo mode.(Only apply to
WLAN IC of Realtek).
Block Relay Between
Clients
Click Enabled/Disabled to decide if blocking relay
packets between clients.
WMM Click Enabled/Disabled to init WMM feature.
ACK Timeout Set ACK timeout value. It shows current time in the
end.
Apply Changes
Click the Apply Changes button to complete the
new configuration setting.
Reset
Click the Reset button to abort change and recover
the previous configuration setting.
3.3.6 Wireless - Security Setup
This page allows you setup the wireless security. Turn on WEP, WPA,
WPA2 by using encryption keys could prevent any unauthorized access to
your wireless network.
Screen snapshot – Wireless Security Setup