Corp. Network Router User's Manual

20
Length
Format
64-bit 128-bit
A
SCII 5 characters 13 characters
HEX 10 hexadecimal codes 26 hexadecimal codes
3.3.7 Wireless - Access Control
If you enable wireless access control, only those clients whose wireless
MAC addresses are in the access control list will be able to connect to
your Access Point. When this option is enabled, no wireless clients will be
able to connect if the list contains no entries.
Screen snapshot – Wireless Access Control
Item Description
Wireless Access
Control Mode
Click the Disabled, Allow Listed or Deny Listed of
drop down menu choose wireless access control
mode.
This is a security control function; only those clients
registered in the access control list can link to this
X-Micro WLAN 11g Broadband Router.
MAC Address Fill in the MAC address of client to register this
X-Micro WLAN 11g Broadband Router access
capability.
Comment Fill in the comment tag for the registered client.
Apply Changes
Click the Apply Changes button to register the
client to new configuration setting.