Corp. Network Router User's Manual

21
Reset
Click the Reset button to abort change and recover
the previous configuration setting.
Current Access
Control List
It shows the registered clients that are allowed to
link to this X-Micro WLAN 11g Broadband Router.
Delete Selected Click to delete the selected clients that will be
access right removed from this X-Micro WLAN 11g
Broadband Router.
Delete All Click to delete all the registered clients from the
access allowed list.
Reset
Click the Reset button to abort change and recover
the previous configuration setting.
3.3.8 WDS Settings
Wireless Distribution System uses wireless media to communicate with
other APs, like the Ethernet does. To do this, you must set these APs in
the same channel and set MAC address of other AP that you want to
communicate with in the table and then enable the WDS.
Screen snapshot – WDS Setup
Item Description
Enable WDS Click the check box to enable wireless distribution
system. Refer to 4.21 What is Wireless Distribution
System (WDS)?
MAC Address Fill in the MAC address of AP to register the wireless
distribution system access capability.