Corp. Network Router User's Manual

22
Comment Fill in the comment tag for the registered AP.
Apply Changes
Click the Apply Changes button to register the AP
to new configuration setting.
Reset
Click the Reset button to abort change and recover
the previous configuration setting.
Set Security Click button to configure wireless security like
WEP(64bits), WEP(128bits), WPA(TKIP),
WPA2(AES) or None
Show Statistics It shows the TX, RX packets, rate statistics
Delete Selected Click to delete the selected clients that will be
removed from the wireless distribution system.
Delete All Click to delete all the registered APs from the
wireless distribution system allowed list.
Reset
Click the Reset button to abort change and recover
the previous configuration setting.
I WDS Security Setup
Requirement: Set [Wireless]->[Basic
Settings]->[Mode]->AP+WDS
This page is used to configure the wireless security between APs.
Refer to 3.3.6 Wireless Security Setup.
Screen snapshot – WDS Security Setup
II WDS AP Table
This page is used to show WDS statistics