Corp. Network Router User's Manual

50
Screen snapshot – Management – WatchDog Settiing
Item Description
Enable WatchDog Click to enable watchdog.
WatchDog IP
Address
IP address that is referred.
Ping Interval Fill in the value by seconds.
Ping Fail to reboot
Count
Fill in the value that is the threshold to reboot router
when ping fails.
Apply Changes
Click the Apply Changes button to complete the
new configuration setting.
Reset
Click the Reset button to abort change and recover
the previous configuration setting.
3.3.28 Management - Quality of Service
This page is used to do bandwidth control by ip address. User sets total
and undefined bandwidth first. Then set bandwidth by range of ip
addresses.