User Manual

- 5 -
CAUTION
When using a temperature higher than 300°C on the hot air gun the
air flow should be set at 45 or higher. This will prevent damage to
the hot air gun and increase the life of the heating element.
4. When the hot air gun is removed from the holder it will start
blowing air and ramp up to the programmed temperature quickly.
5. When the hot air gun is not in use always place it back in the side
holder or in the vertical position in the upright tower holder. The
hot air gun will continue blowing air until the temperature gets back
down to 100°C and then the airflow will stop and go back into sleep
mode.
Note: When the hot air gun is initially returned to either of these holders,
the air flow may increase noticeably while the hot air gun is
cooling down and going into sleep mode. This is a safety feature
built into the unit.
6. When the hot air gun is removed again from either of these holders
it will start blowing air and ramp up to the programmed temperature
again quickly.
7. To turn the hot air gun off, turn off the II power switch on the front
of the unit.
Note: Do not unplug the unit or shut off the Main Power Switch on
the back of the unit until you have placed the hot air gun in the
holder and it has cooled down and the air has stopped blowing
automatically - this allows a full cool down of the hot air gun.
When the unit is not in operation, turn the entire unit off at the back of the
unit and unplug from the outlet.