Owner's Guide

This addendum is issued to expand the Ground Fault Circuit Interrupter (GFCI)

outlet features of the PROWatt series products.

The addendum affects the following PROWatt products:

• PROWatt 800 Owner’s Guide (part no. 440-0159 Rev 5)

• PROWatt 1000 Owner’s Guide (part no. 445-0116-01-01)

• PROWatt 1500 Owner’s Guide (part no. 445-0160 Rev 5)

• PROWatt 1750 Owner’s Guide (part no. 445-0117-98-01)

Front Panel (AC End)

This section affects the description of the AC Outlet with Ground Fault Circuit

Interrupter (GFCI) of all the above mentioned PROWatt products.

PROWatt 800/1000/1500/1750

Owner’s Guide Addendum

Addendum

PROWatt Series

976-0159-01-01 Rev A

Figure 1

AC Outlet with GFCI (PROWatt 1750 model shown)

Feature Description

➅

AC Outlet. This is a Ground Fault Circuit Interrupter (GFCI) outlet,

equipped with an LED indicator light. The LED comes on when AC power

is interrupted due to a ground fault or an end of life (for the GFCI) fault.

See “Troubleshooting Reference” below.

OF F

➀

➆

➃

➅

➄

➁

➂

LED

PAGE 1
PROWatt 800/1000/1500/1750 Owner’s Guide Addendum Addendum PROWatt Series 976-0159-01-01 Rev A This addendum is issued to expand the Ground Fault Circuit Interrupter (GFCI) outlet features of the PROWatt series products. The addendum affects the following PROWatt products: • • • • PROWatt 800 Owner’s Guide (part no. 440-0159 Rev 5) PROWatt 1000 Owner’s Guide (part no. 445-0116-01-01) PROWatt 1500 Owner’s Guide (part no. 445-0160 Rev 5) PROWatt 1750 Owner’s Guide (part no.
PAGE 2
PROWatt Series Troubleshooting Reference This section affects all the above mentioned PROWatt products. Problem Possible Cause Solution No output voltage; the GFCI LED light is on. GFCI trip fault, i.e., the ground fault trip circuit has been activated. 1. 2. GFCI end of life fault, i.e., the GFCI has permanently ceased to function. 1. 2. No output voltage; the GFCI LED light is on. Remove any AC loads. Press the Reset button on the GFCI. If it trips again a ground fault is present. 3.