Instructions / Assembly

750 W Lake Cook Rd, Suite 480 | Buffalo Grove, IL 60089 | Ph: 847.495.4700
w w w . B u y X c l u d e r . c o m
Installation Instructions:
Install the Xcluder Garage Door
Rodent Shield at the bottom of the
weather stripping on both sides of
your garage door.
The Xcluder Garage Door Rodent
Shield should be installed so that the
shield is on the inside of the weather
stripping facing the garage door.
1. Wipe the inside of the weather
stripping with the included alcohol
pad. Ensure the surface is clean, dry
and free of dirt and debris before
attaching the Garage Door Rodent
Shield.
2. Peel off the protective backing off the
Garage Door Rodent Shield and affix
it to the inside of the weather
stripping.
3. The Rodent Shield should be flush
with the bottom and side edges of the
weather stripping.
Xcluder™ Garage Door Rodent Shield Installation Instructions
Item# 162940, 162942, 162944, 162946, 162948
Thank you for your purchase of an Xcluder™ Garage Door Rodent Shield.
Version BG1, 4-27-2016
Garage
Outside
Install Rodent Shield on the inside of
the weather strip as shown below.
STOP: Do not install on the outside of
the weather stripping