Manual

Xerox 4595 Copier/Printer System Administration Guide
8-22
8. Setups
Auto Job Release
If an error occurs during a copy or scan job, you can set the time
that elapses until the current job is automatically cleared, and
thereby enables the completion of the next job. Error that may
occur include a paper feed, an jammed original, a copy jam, the
machine runs out of hard disk space, etc. Once the current job is
cleared, jobs that can be continued are limited to those that only
use parts of the machine not affected by the error.
Set the value in the range 4 to 99 minutes, in 1 minute
increments. Select Off if you do not want to use this feature.
1. From the Machine Clock/Timers screen, select Auto Job
Release, and select Change Settings.
2. Select Off or On.
3. If you selected On, set the time by using the S, T, or the
numeric keypad to enter a numeric quantity.
4. Select Save to save the settings and return to the previous
window.