Manual

Xerox 4595 Copier/Printer System Administration Guide
3-11
3. Using CentreWare Internet Services
9. Set the Poling Interval.
10.Set the Number of Searches.
11.Set the Password.
a. Enter the Password.
b. Re-enter the same password in the Re-enter Password
field.
12.Select the Enable check box to enable the TBCP Filter.
NOTE: The TBCP Filter checkbox will have a checkmark in it
indicating that the TBCP Filter is enabled.
13.Set the Tree Name.
14.Set the Context Name.
NOTE: Set this item only when the operation mode is in
Directory Service.
15.Select a frame type from the Transport Protocol - Frame
Type pull-down menu.
NOTE: Set this item only when the operation mode is in
Directory Service.
16.Select the Enable check box to enable SLP - Active
Discovery.
17.Reflect the values as the machine's setting values.
a. Click the Apply New Settings. A screen to enter the user
name and password will be displayed.
b. Enter the System Administrator UserID and password into
User Name and Password, and then click OK.
NOTE: The default User ID value is 11111 and password is
x-admin.
c. The right frame on the web browser will change to the
machine reboot display.
d. Click Reboot. The machine will reboot and the setting
value will be reflected.